XTC-3D High Performance 3D Print Coating, 6.4 Oz from Smooth-On

XTC-3D High Performance 3D Print Coating, 6.4 Oz from Smooth-On
XTC-3D High Performance 3D Print Coating, 6.4 Oz from Smooth-On XTC-3D High Performance 3D Print Coating, 6.4 Oz from Smooth-On (click images to enlarge)
$23.99
In Stock Add to Cart
Product prices and availability are accurate as of 2018-11-29 19:29:24 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

Description of XTC-3D High Performance 3D Print Coating, 6.4 Oz from...

We are proud to offer the fantastic XTC-3D High Performance 3D Print Coating, 6.4 Oz.

With so many on offer these days, it is great to have a make you can trust. The XTC-3D High Performance 3D Print Coating, 6.4 Oz is certainly that and will be a superb acquisition.

For this price, the XTC-3D High Performance 3D Print Coating, 6.4 Oz comes widely recommended and is always a regular choice amongst many people. Smooth-On have provided some great touches and this equals great value for money.

Manufacturer Description

XTC-3D is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D cures to a hard, impact resistant coating that can be sanded, primed and painted.
Adding colors and metal effects is easy. Use with UV Resistant Pigment for XTC-3D (ASIN: B01BKSLHHK) to paint and seal at the same time!
Inexpensive to Use: 1 oz covers 100+ square inches.
90% Time & Labor Savings: XTC-3D fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.
Coat any 3D Print Surface: XTC-3D can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.
XTC-3D does not contain VOC's, phthalates or phosphates.

Product Features

XTC-3D high performance 3d print coating - protective coating for smoothing and finishing 3d printed parts that does not melt plastic; XTC?3D fills in 3d print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated; XTC?3D can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media such as EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper; Two liquids are mixed together and brushed onto any 3d print, fabric, wood, and more. Coating self-levels and wets out uniformly without leaving brush strokes; 1 oz covers 100+ square inches. XTC?3D can be mixed with metal powders, SO-Strong tints, and Ignite or UVO pigments making adding colors and metal effects easy.

Write a Review

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.