XTC-3D High Performance 3D Print Coating - 24oz. Unit by Smooth-On, Inc.

XTC-3D High Performance 3D Print Coating - 24oz. Unit by Smooth-On, Inc.
XTC-3D High Performance 3D Print Coating - 24oz. Unit by Smooth-On, Inc. (click images to enlarge)
$26.99
- stock arriving soon
Product prices and availability are accurate as of 2019-05-21 22:47:25 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

Description of XTC-3D High Performance 3D Print Coating - 24oz. Unit...

We are delighted to stock the fantastic XTC-3D High Performance 3D Print Coating - 24oz. Unit.

With so many on offer today, it is good to have a brand you can recognise. The XTC-3D High Performance 3D Print Coating - 24oz. Unit is certainly that and will be a excellent acquisition.

For this price, the XTC-3D High Performance 3D Print Coating - 24oz. Unit comes widely recommended and is always a popular choice for most people. Smooth-On, Inc. have provided some excellent touches and this results in great value.

Manufacturer Description

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy. Inexpensive to Use - 1 oz covers 100+ square inches. 90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. Coat any 3D Print Surface - XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper. XTC-3D® does not contain VOC's, phthalates or phosphates. Adult Supervision Required. Keep Out of the Reach of Children.

Product Features

Epoxy Coating for 3D Printed Objects Smooths 3D Printed Objects Compatible with SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

Write a Review

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.