ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable for 3D Printer Delta Kossel Prusa i3 from ReliaBot

ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable for 3D Printer Delta Kossel Prusa i3 from ReliaBot
ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable for 3D Printer Delta Kossel Prusa i3 from ReliaBot ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable for 3D Printer Delta Kossel Prusa i3 from ReliaBot ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable for 3D Printer Delta Kossel Prusa i3 from ReliaBot ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable for 3D Printer Delta Kossel Prusa i3 from ReliaBot ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable for 3D Printer Delta Kossel Prusa i3 from ReliaBot (click images to enlarge)
$19.99
- stock arriving soon
Product prices and availability are accurate as of 2019-04-22 18:21:39 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

Description of ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable...

We are delighted to offer the brilliant ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable for 3D Printer Delta Kossel Prusa i3.

With so many available today, it is great to have a name you can trust. The ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable for 3D Printer Delta Kossel Prusa i3 is certainly that and will be a superb acquisition.

For this reduced price, the ReliaBot Auto Bed Leveling Sensor with LED and 70cm Cable for 3D Printer Delta Kossel Prusa i3 comes widely respected and is always a popular choice with many people. ReliaBot have provided some great touches and this means good value.

Manufacturer Description

How to use it?
1. Upload a firmware with auto bed leveling function to the mainboard.
2. Connect the sensor through the LED board to Z-min on mainboard (depending on different firmware, mostly Z-min) You might need to change the wires' order to fit different mainboard. S is for signal, + is for +5V, the last one is for GND.
3. Mount the sensor to the nozzle (without heating to 45°C). Turn on the power, if the connection is right, press the sensor, the LED will light. Otherwise, please check the connection.
4. Use the function of auto bed leveling to level the bed.
5. Remove the sensor from the nozzle to start testing or printing.

Packing list:
1 * Auto leveling sensor
1 * Adapter with LED
1 * 70cm 3-pin cable
Visit this web for more details: marlinfw.org/docs/configuration/probes.html

Product Features

Suitable for E3D V5/V6 nozzle Accuracy: ±0.05mm The LED will light when the sensor is triggered Please make sure the temperature of the nozzle is not over 45°C, or the sensor could be damaged. Please make sure the connecting is right before leveling the bed, you might need to change the order of the cable according to different mainboard.

Write a Review

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.