Proto-pasta HTP21730-CF High Temperature Carbon Fiber Spool , PLA 1.75 mm, 3 kg , Black by Protoplant INC
Description of Proto-pasta HTP21730-CF High Temperature Carbon Fiber...
We are proud to offer the excellent Proto-pasta HTP21730-CF High Temperature Carbon Fiber Spool , PLA 1.75 mm, 3 kg , Black.
With so many available recently, it is great to have a name you can recognise. The Proto-pasta HTP21730-CF High Temperature Carbon Fiber Spool , PLA 1.75 mm, 3 kg , Black is certainly that and will be a superb acquisition.
For this reduced price, the Proto-pasta HTP21730-CF High Temperature Carbon Fiber Spool , PLA 1.75 mm, 3 kg , Black comes highly recommended and is a regular choice with most people. Protoplant INC have included some nice touches and this means good value for money.
htpla-cf is now available in a mammoth 3kg spool for large format printing! 1.75mm diameter 3kg spools contain more than 1 KM of filament! How cool is that!!
htpla-cf, like aromatic coffee, is based on our high Temp PLA V2.0, so it prints with ease and also has a potential heat deflection temperature (hdt) in excess of 140C (285F) depending on processing. We had good results annealing (also called heat treating or crystallizing) in an Oven at 110C (225F) for an hour. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the Oven to minimize distortion. Parts must be baked above 60C for any crystallization to occur.
carbon fiber is somewhat abrasive, so consider upgrading to a wear resistant nozzle for less regular maintenance.
In our experience, good results were achieved using standard PLA parameters and standard build surface preparation (Blue tape or glue stick). no heated bed required.
contact Proto-pasta for more information.