Bondtech QR Universal Extruder - 1.75mm from Bondtech

Bondtech QR Universal Extruder - 1.75mm from Bondtech
Bondtech QR Universal Extruder - 1.75mm from Bondtech Bondtech QR Universal Extruder - 1.75mm from Bondtech Bondtech QR Universal Extruder - 1.75mm from Bondtech Bondtech QR Universal Extruder - 1.75mm from Bondtech (click images to enlarge)
$175.00
In Stock Add to Cart
Product prices and availability are accurate as of 2018-11-29 07:11:16 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

Description of Bondtech QR Universal Extruder - 1.75mm by Bondtech

We are happy to offer the excellent Bondtech QR Universal Extruder - 1.75mm.

With so many on offer these days, it is good to have a make you can recognise. The Bondtech QR Universal Extruder - 1.75mm is certainly that and will be a great buy.

For this great price, the Bondtech QR Universal Extruder - 1.75mm comes widely recommended and is a regular choice for lots of people. Bondtech have provided some excellent touches and this means great value for money.

Manufacturer Description

The Bondtech QR Universal extruder for 1.75 mm filament gives you the markets highest performance, precision and reliability with its DualDrive gear system. It is now available in a Left-Hand version for easier placement of the extruder especially in Dual material setups.

The new design makes it possible to change filament by activating the QuickRelease lever. The spring-loaded secondary drive gear adapts to filament variations and optimal pressure can be adjusted to match your preferences.

CNC-machined precision drive gears that are hardened to withstand wear from abrasive filaments.

Super sharp drive gear teeth's grips the filament from both sides that gives very high available feeding force to ensure uninterrupted material flow to avoid under extrusions. Filament grinding and slippage is now a thing of the past.

Housing parts professionally 3D-printed in nylon with the SLS technology (SelectiveLaserSintring) for strength and precision.

Use metric sized PTFE tubing for best performance, see below.

The extruder feeds material in both directions. The point of filament entry and exit are side A and side B.

  • Side A is fitted with a push-fit connector that cannot be changed.
  • Side B has an integrated "Groovemount" for a hotend that meets the Groovemount standard like E3D-V5/V6 and other types.

For the Groovemount connector on side B we also offer the following adapters separately where you can find in the bottom of the page at "Suggested Accesories"

  • "Filament guide" for a Bowden Tube style configuration where the filament entering from side B and fed into a Boden tube connected at side A, like Ultimaker 2/original.
  • "Direct to Bowden" adds a push-fit connector on side B for configurations where the extruder is in the middle of a Bowden Tube style setup.

Product Features

Side A is fitted with a push-fit connector that cannot be changed. Side B has an integrated "Groovemount" for a hotend that meets the Groovemount standard like E3D-V5/V6 and other types. "Filament guide" for a Bowden Tube style configuration where the filament entering from side B and fed into a Boden tube connected at side A, like Ultimaker 2/original. Direct to Bowden" adds a push-fit connector on side B for configurations where the extruder is in the middle of a Bowden Tube style setup. Housing parts professionally 3D-printed in nylon with the SLS technology (SelectiveLaserSintring) for strength and precision.

Product Tags

Write a Review

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.