BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer from BIQU
Description of BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for...
3dprinterwiki.info 3dprinters and parts are proud to present the fantastic BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer.
With so many available today, it is great to have a make you can recognise. The BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer is certainly that and will be a excellent buy.
For this great price, the BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer comes highly respected and is a regular choice with most people. BIQU have added some excellent touches and this results in good value for money.
Mounting holes:3.2mm diameter, for M3 screws
DCIN: "+" connect the power positive electrode: "-"connect the power negative, electrode(support "+ 12 v"or "+ 24 v" power supply, it is recommended to use + 24 v power supply)
Heatbed: connect to heatbed line(there are no positive or negative)
Connect the heatbed control port on the motherboard(there are no positive or negative)
1.When you connect power supply cable, you need to pay attention to distinguish the positive and negative polarity of the power supply,and do not reverse the connection of the cable to avoid burning the module and causing unnecessary losses
2.Module placement problem: when you use the module, do not put it in a place where the wires are dense. In this way, it helps to reduce the heating burden on the module and increase the safety
3.When the module is working: don't let the conductor to touch its bottom, it can prevent short circuit and burn out
1 x Heated Bed Mosfet
1 x Connection cable for input signal
2x Cable for heat bed connect Wire
2x Cable for power