Adafruit (PID 324) Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA from Adafruit

$18.95
In Stock Add to Cart
Product prices and availability are accurate as of 2018-11-16 02:46:14 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

Description of Adafruit (PID 324) Stepper motor - NEMA-17 size - 200...

3dprinterwiki.info 3dprinters and parts are delighted to offer the brilliant Adafruit (PID 324) Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA.

With so many available these days, it is good to have a name you can recognise. The Adafruit (PID 324) Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA is certainly that and will be a superb buy.

For this great price, the Adafruit (PID 324) Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA comes highly recommended and is always a popular choice with lots of people. Adafruit have added some great touches and this results in good value for money.

Manufacturer Description

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driver) and a wall adapter or lead-acid battery.

Some nice details include a ready-to-go cable and a machined drive shaft (so you can easily attach stuff). We drove it with an Adafruit motor shield for Arduino and it hummed along nicely at 50 RPM. To connect to our shield, put the wires in this order: Red, Yellow, skip ground, Green, Brown (or Gray)

Product Features

200 steps per revolution, 1.8 degrees Coil #1: Red & Yellow wire pair. Coil #2 Green & Brown/Gray wire pair. 4-wire, 8 inch leads Bipolar stepper, requires 2 full H-bridges! 12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current 42mm/1.65" square body 31mm/1.22" square mounting holes, 3mm metric screws (M3) 5mm diameter drive shaft, 24mm long, with a machined flat

Write a Review

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.