YS YS-PA-W-1.75-1.0 Nylon Filament, Compatible with Makerbot/UP/Afinia/Robo 3D printer, 1.75 mm 1kg, White from Guangzhou Yousu Plastic Technology Co., Limited

$26.99
In Stock Add to Cart
Product prices and availability are accurate as of 2018-12-03 05:19:54 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

Description of YS YS-PA-W-1.75-1.0 Nylon Filament, Compatible with...

3dprinterwiki.info 3dprinters and parts are happy to present the famous YS YS-PA-W-1.75-1.0 Nylon Filament, Compatible with Makerbot/UP/Afinia/Robo 3D printer, 1.75 mm 1kg, White.

With so many available today, it is good to have a make you can recognise. The YS YS-PA-W-1.75-1.0 Nylon Filament, Compatible with Makerbot/UP/Afinia/Robo 3D printer, 1.75 mm 1kg, White is certainly that and will be a excellent purchase.

For this price, the YS YS-PA-W-1.75-1.0 Nylon Filament, Compatible with Makerbot/UP/Afinia/Robo 3D printer, 1.75 mm 1kg, White comes highly recommended and is always a popular choice for most people. Guangzhou Yousu Plastic Technology Co., Limited have provided some great touches and this means great value.

Manufacturer Description

100% virgin raw material

Consistent color throughout entire spool

Higher strength and durability than normal 3D filaments

Strong filament suitable to print mechanical parts

Recommended print temperature: 220 - 260°C (better with heated bed)

Always keep nylon filament dry as water absorption can cause poor prints

Use Instruction:

1. Open the bag, put the filament spool on the holder.

2. Find the free end of the 3d filament, remember not to loose the end in case of any crossing/tangling loops.

3. Set a printing temperature based on the filament material, press the extruding button and see if the melted filament extrudes smoothly. If the silky filament comes out evenly and easily, it means that it’s the right temperature; if there is “kaka” sound, it means that the temperature is not high enough and you need to increase the extruder temperature; if the extruding goes too easily while the surface is rough, it means that the temperature is too high and you need to lower the extruder temperature.

4. When the print temperature is set, you can choose the model, get sliced and start printing.

Filament Storage:

1. Please keep the filament at dry place and avoid direct sunlight or source of heat.

2. When finish using 3d filament, put the spool back into the sealed bag to avoid moisture.

3. When finish printing, place the free end of filament back to the spool hole in case of crossing/tangling loops.

Product Features

Perfectly wound filament without tangles 1.75mm Filament Diameter (Tolerance: +/- 0.03mm) Quality Certificate: ROHS, ISO9001 Recommended Print Temperature: 220 - 260°C (Better with Heated Bed) Spool Diameter: 7.9" - Spool Width: 2.6" - Spool Inner Hub Diameter: 2.2"

Product Tags

Write a Review

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.