Quimat 3Pcs Nema 17 Stepper Motor Bipolar 1.7A 84oz.in(59Ncm) 47mm Body 4-lead w/1m 4-Pin Cable and Connector with Mounting Brackets for 3D Printer/CNC by Quimat

Price:

Please choose from the options above to see price and availability.

Description of Quimat 3Pcs Nema 17 Stepper Motor Bipolar 1.7A...

3dprinterwiki.info 3dprinters and parts are happy to offer the excellent Quimat 3Pcs Nema 17 Stepper Motor Bipolar 1.7A 84oz.in(59Ncm) 47mm Body 4-lead w/1m 4-Pin Cable and Connector with Mounting Brackets for 3D Printer/CNC.

With so many available today, it is great to have a make you can recognise. The Quimat 3Pcs Nema 17 Stepper Motor Bipolar 1.7A 84oz.in(59Ncm) 47mm Body 4-lead w/1m 4-Pin Cable and Connector with Mounting Brackets for 3D Printer/CNC is certainly that and will be a excellent acquisition.

For this reduced price, the Quimat 3Pcs Nema 17 Stepper Motor Bipolar 1.7A 84oz.in(59Ncm) 47mm Body 4-lead w/1m 4-Pin Cable and Connector with Mounting Brackets for 3D Printer/CNC is widely respected and is a regular choice amongst most people. Quimat have provided some excellent touches and this results in good value for money.

Manufacturer Description

Stepper motor Specification:
Step Angle: 1.8 deg.
Holding Torque: 59Ncm(84 oz.in)
Rated Current/phase: 1.7A
Frame Size: 41 x 41mm
Body Length: 47mm
Shaft Diameter: 5mm
Shaft Length: 22mm
Weight: 380g

Mounting Bracket Kit Specification:
Three Pack - NEMA 17 Mounting Bracket - 90 degrees
- M3 Screws Included (12)
- Mounting Holes: 31mm center-to-center
- Max Collar Diameter: 22mm
- Powder-coated steel
- Nema17 Standard
- Mounting Holes: 31mm center-to-center
- Max Collar Diameter: 22mm
Package Including:
3 Pack Nema 17 stepper motor with 1m Cable & Connector
3 Pack - Nema 17 Stepper Motor Mounting Bracket
12 pcs M3 Screws

Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

NEMA-17 Stepper Motor 84 oz.in (59 Ncm) 47mm Body 1.8 degree with 1M 4-pin Cable and Mounting Bracket Kit DIY 3D Printer CNC Robot. 1m wire, one connect electrical machine, on the other end has variety optional ports; heat shrink tubing effect to prevent the wire tangled up. 90 Degree Mounting Bracket with M3 screws. 4-wire 1M Lead w/ Insulated Sleeve - Detachable for easy installation. 84 oz.in (59 Ncm) Holding Torque. 1.8 degree step angle (200 steps/rev.)

Write a Review

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.