KINGPRINT NEW Smoothieware Controller Board MKS SBASE V1.3 32bit Controller Panel Board for 3D Printer from KINGPRINT
Description of KINGPRINT NEW Smoothieware Controller Board MKS SBASE...
3dprinterwiki.info 3dprinters and parts are proud to stock the brilliant KINGPRINT NEW Smoothieware Controller Board MKS SBASE V1.3 32bit Controller Panel Board for 3D Printer.
With so many on offer these days, it is wise to have a make you can recognise. The KINGPRINT NEW Smoothieware Controller Board MKS SBASE V1.3 32bit Controller Panel Board for 3D Printer is certainly that and will be a perfect acquisition.
For this reduced price, the KINGPRINT NEW Smoothieware Controller Board MKS SBASE V1.3 32bit Controller Panel Board for 3D Printer is highly respected and is a regular choice for most people. KINGPRINT have provided some excellent touches and this means great value.
-Good to work with 12864LCD and MKS TFT touch screen.
Pls confirm whether the positive and negative reversed before powering up again, if the user is due to reverse power and burn, and we do not guarantee such problems.
Do not plug in case of power motor drive easily lead to burn; do not adjust the current in the motor is running. The correct approach is to first disconnect the power, unplug the motor, and then re-power, adjust potentiometer, measure the voltage on the potentiometer until the measured voltage is the same as expected.
MKS Sbase board must be inserted TF card can be used, it must be prepared to TF card, and be careful not to use poor quality TF card.
-Ancillary products is not including, need to purchase:
-4 stepper motor: 42 motor with line
-Limit switch 3: MKS limit switches
1* MKS SBASE V1.3 32-Bit Controller Panel Board
If you find any problem, please contact us at first, and our technical staff will help you to solve the problem at once. Thanks!
Support highly modular open source firmware Smoothieware, easy for secondary development.
Support network function, through the network cable can directly access the network using the browser to remote control.
Using DRV8825 stepper driver which supports 32-microstep and with excellent cooling.
Currents of the stepper motor can be set directly, which can avoid the damage.